The Final Setup Guidelines to Assist Excellent Your Barbell Overhead Press

The barbell overhead press would possibly seem to be a grab-and-go train. Nonetheless, anybody who has overhead pressed severe weight is aware of this transfer punishes sloppy setup greater than virtually another carry. Miss one element and the bar drifts ahead, your decrease again over-extends, or your shoulders say no thanks.

Not like bench urgent or deadlifting, the overhead press locations your whole physique beneath the bar. Your toes, legs, core, lats, and higher again are all on excessive alert.

That’s why skilled lifters don’t deal with the overhead press as a “seize and go” motion as a result of the setup creates stability. Stability creates energy, and energy creates bolder shoulders. Whereas not everybody’s overhead press will look the identical resulting from shoulder mobility, torso size, and private type, that’s OK. What issues is mastering the setup behind each robust press. With the assistance of energy coach Lee Boyce, a 16-year-certified energy and conditioning specialist, we break down the OHP pre-lift guidelines step-by-step. Let’s dive in.

The Ultimage Barbell Overhead Pre-Carry Guidelines

Let’s dangle on to the barbell and prepare to crush your overhead press with the last word overhead press pre-lift guidelines.

Step 1: Foot Place and Stance

A powerful overhead press begins with the toes. Your toes kind the bottom, and if they’re unsteady, the whole lot above will falter. Earlier than you unrack the bar, set up a stance that feels balanced and steady.

1. Stand along with your toes roughly hip-width aside.
2. Toes straight forward or barely out, relying on consolation.
3. Distribute your weight evenly by your heel, large toe, and pinky toe.
4. Keep away from rocking ahead into your toes or leaning again into your heels.

Inside cue: Really feel the tripod—heel, large toe, pinky toe. Exterior cue: Grip the ground along with your toes.

Lee’s Tip: The hip-width stance is simple to search out by leaping as excessive as you possibly can on the spot. The width you used for the leap is probably going the very best width on your OHP.

Step 2: Rooting and Decrease-Physique Rigidity

A stable overhead press requires pressure out of your toes all the best way to your fingertips—and that begins with rooting into the ground. When your decrease physique is locked in, your torso stays steady, your bar path stays on observe, and your shoulders say thanks.

1. Grip the ground along with your toes.
2. “Screw” your toes into the bottom by creating slight exterior rotation on the hips.
3. Have interaction your glutes to forestall your decrease again from over-arching.
4. Preserve your quads agency with out locking the knees.

Inside cue: Glutes tight, legs agency. Exterior cue: Unfold the ground aside.

Lee’s Tip: Take into consideration staying tight within the quads. Participating the quads is simpler to do once you concurrently squeeze your butt tight. Preserve the heels down for full foot contact.

Step 3: Grip Width and Hand Place

Your grip controls the whole lot above it—bar path, shoulder and elbow motion, and the way successfully you switch power into the press. If it’s too huge, your elbows flare out. If it’s too slim, the bar tends to float ahead. The intention is a grip that aligns your wrists over your elbows with vertical forearms.

1. Set your fingers simply outdoors shoulder width.
2. Preserve your wrists impartial.
3. Let the bar sit within the heel of your palm, not in your fingers.
4. Line up your forearms vertically beneath the bar to ensure an environment friendly urgent path.

Inside cue: Knuckles to the ceiling. Exterior cue: Punch the bar by your palms.

Les’s Tip: Should you’re snug with a false grip, be at liberty to strive it. It’ll be simpler to get the bar stacked over the forearm and to keep away from it rolling towards the fingers, which might end in a poor energy provide.

Step 4: The Rack Place

After you set your stance and your grip, the main focus turns to the rack place. If the bar begins too low, too excessive, or too far ahead, you spend the entire carry preventing physics. The rack place units your shoulders, elbows, and torso within the optimum place.

1. Relaxation the bar in your higher chest or collarbone.
2. Preserve your elbows barely in entrance of the bar.
3. Have interaction the lats to stabilize and help the maintain.
4. Preserve ribs down.

Inside cue: Elbows ahead, ribs down. Exterior cue: Make sure the rack is stacked.

Lee’s Tip: The bar ought to begin in touch with the collarbone if potential. It’s okay if the wrists break a bit to permit this to occur. If immobility or inflexibility prevents this from occurring, then deal with dumbbell OHP as you’re employed on enhancing your vary of movement concurrently.

Step 5: Breathe and Brace

The overhead press calls for full-body pressure. Should you lose your brace, your decrease again arches, your ribs flare, and the bar drifts ahead. A correct breath and brace lock your torso in, providing you with a stable press basis.

1. Take an enormous 360-degree breath, filling your stomach, sides, and decrease again with air.
2. Pull your ribs down and stack them instantly over your hips.
3. Brace your core as in case you’re making ready for a punch.

Inside cue: Fill the belt and lock it down. Exterior cue: “Glue your ribs to your hips.

Lee’s Tip: The intention right here is to maintain your abdomen filled with air by the preliminary press off the collarbone. Breathe in, maintain your breath, and brace your abdomen outward to make your waistline wider from the perimeters. Press the load, and as soon as the bar is out of your peripheral imaginative and prescient, exhale to reinforce lockout. Take a breath in at lockout, then begin your descent.

Step 6: Higher-Physique Rigidity and Bar Path Prep

Earlier than urgent, your higher physique must be locked in. Your lats, traps, and higher again all play a task in protecting the bar path tight and your torso regular.

1. Reengage your glutes.
2. Have interaction your lats sufficient to information the bar and stabilize the underside place.
3. Preserve your chest tall however ribs down.
4. Tuck your chin so the bar can clear your face.

Inside cue: “Tall backbone, tight lats. Exterior cue: “Transfer your face out of this place.

Lee’s Tip: Preserve your posture erect and pull your shoulder blades again for a proud chest. That can create the “shelf” wanted for the bar’s place to begin. You shouldn’t really feel “relaxed” when establishing for the train. Tuck your chin in, and lean in just a bit bit.

Step 7: The Inexperienced Mild Guidelines

This yellow mild pause is the place nice reps start. Earlier than you press, run by this rapid-fire psychological scan to make sure the whole lot is prepared:

• Toes rooted into the bottom
• Quads and glutes evenly squeezed
• Core braced, ribs over hips
• Elbows ahead
• Wrists stacked over elbows
• Bar resting on higher chest
• Chin tucked
• Eyes ahead

Now you’re prepared.

Widespread Barbell Overhead Press Errors

Keep away from these frequent errors to get higher reps and bolder shoulders.

Over-extending the decrease again: Letting your ribs flare, and your hips drift ahead, turns the press right into a backbend. Decrease again hyperextension is the #1 explanation for overhead press breakdowns. As a substitute, guarantee to brace your core and interact your glutes.

Urgent with free legs and tender toes: In case your base isn’t stable, the bar will drift. The overhead press is a full-body carry; press from the bottom up. Confer with step 2 to cease this from occurring.

Letting the elbows flare behind the bar: This destroys leverage and forces the bar ahead. Your elbows ought to keep barely in entrance of the bar at first. If this is a matter you can’t repair, swap to the dumbbell OHP.

Bar path drifting ahead: The bar ought to journey up, not out. Ahead bar path equals misplaced energy and crappy, harmful reps. Guarantee your joints are stacked, and the brace is stable.